Fill all types of cans quickly and easily with this compact machine. The machine should be placed at working height close to the clear beer tank. Beer or soda goes to the machine as cold as possible. A maximum of 2 degrees is ideal. Place 4 empty cans in the machine each time and seal the 4 full cans with lids at the end. Everything in between is fully automatic.
Rigtersfillers machines are designed and produced in the Netherlands using high quality parts and valves and with the end-user in mind.
Can height and filling height are adjustable. The 7” waterproof touchscreen is used to set all filling parameters: CO2 pre-purge time, filling time and pressure, etc. Filling is automated by just pressing a single button.
- Suitable for all types of cans, both slimline and standard sizes
- The machine also fits bottles from 0.2 to 0.5 litre (maximum 71 mm in diameter and 230 mm high)
Specifications
- Equipped with 4 filling heads for standard cans up to 0.5 l
- Filling heads for slim cans optionally available (018.390.T4S)
- Filling heads for bottles up to 0.5 l (max. 71 mm diam. x 230 mm height) optionally available (018.390.T4B)
- Up to 900 cans per hour
- Fully automatic pre-purge and filling with unique sensor technology
- Foam creation technology for minimal O2 pickup
- All stainless steel frame
- Stainless steel valves with EPDM seal
- 7” waterproof touchscreen
- Arduino PRO controlled with lifetime updates
- Beverage input: Tri clamp 1.5”
- Compressed air input: 8 mm push in, 8 bar max.
- C02 input: 8 mm push in / 1.4”
- 110 ~ 230 V, 2 A max. power
- Dimensions: 875 x 772 x 370 mm (W x H x D)
- Weight: 50 kg
