Rigters Manual Filler with CO2 Fast Flush - 4 heads

Rigtersfillers machines are designed and produced in the Netherlands using high quality parts and valves and with the end-user in mind.

Bottle height and filling height are adjustable. The machine can fill bottles between 0.2 and 1 litre. The 7” waterproof touchscreen is used to set all filling parameters: CO₂ pre-purge time, filling time and pressure, etc. Filling is automated by just pressing a single button.

The maximum filling speed depends on several factors such as temperature (we recommend max. 2°C), pressure on the brite tank (0.6 bar) and CO₂ saturation (4 to 5 g CO₂./l )  Experience shows that up to 600 bottles can be filled per hour when operated by two people.

The machine can be cleaned in under 15 minutes.

Fast Flush system
This filler is equipped with a Fast Flush system, this means that it is possible to open an extra valve while PRE-purging CO₂. This way flushing out O₂ is faster and you get better shelf life (especially for bigger bottles and kegs).

Special features of the 1.2 version (2023)

• Renewed software with the possibility of fine adjustment per filling head
• USB connector for easy software updates
• PowerCON connector for power supply
   

Easy to Operate:

• Lower the lever with one hand and with the other hand slide the bottle under the filling head. By releasing the lever, the bottle will be pressed into place under the filling head.
• Press the start button of the relevant filling head. The filling will now happen automatically.
• First, CO₂ will be injected into the bottle so that oxygen disappears from the bottle. The time and pressure of the CO₂ pre-rinse is fully adjustable.
• After the CO₂ flushing, the bottle will be filled until it reaches the sensor value set on the touchscreen.
• You can now remove the bottle and start the process again.
• The filling speed can be regulated so that when you put the last bottle under the head, the first one is ready to be replaced. 

Specifications:

• Power: 110-320V 3A max
• Inputs: ¼” CO₂ female inlet / liquid input: 1,5”TC
• Capacity: +/- 150 bottles per hour per filling head when operated by two people (one for filling, one for capping)
• Filling with or without counterpressure is possible. Max. tank/pump pressure: 1,2 bar
• 1 year carry-in warranty
• Available options: stainless steel stand and filling heads for 5 litre party kegs (see accessories)
   

And there is more!
There is also an 8-filling head version of this counterpressure filler. Ask for a quote.
We have a demo machine on display in our shop. Feel free to drop by to take a look.
Would you like more information from a member of our professional sales team? Please contact us.