Brewery hose butyl crimped DIN40 fittings – 5 m

Brewery hose butyl crimped DIN40 fittings – 5 m

check_circle Item nr.: 018.270.5D40 - In stock

Quantity
459,-
per unit

Ideal brewery hose for craft producers of beer, wine, juice and alcoholic beverages. Fitted with crimped DIN40 fittings

  • 10 bar working pressure
  • Temperature range -40°C to +120°C 
  • Reinforced with a steel spiral and strong textile reinforcements
  • Low permeability of gas and chemical resistant
  • The butyl innertube makes the hose very suitable for CIP cleaning

Description - Brewery hose butyl crimped DIN40 fittings – 5 m

This brewery, dairy or food grade transfer hose is a multi-layered spiral-reinforced EPDM / BUTYL pressure and suction hose with crimped stainless steel fittings. Highly suitable for beer, wine, fruit juice, drinking water, fatty products and alcoholic drinks up to 92%. Up to a temperature of 23°C, the hose is even suitable for max. 96,5% alcohol.

Fitted with crimped DIN40 fittings (AISI 316 stainless steel). 

Phthalate-free and also suitable as tank truck hose. The butyl innertube makes the hose very suitable for CIP cleaning.

  • Extra smooth, odourless and tasteless white butyl IIR inner wall, ideal for foodstuffs
  • Wear-resistant EPDM exterior suitable for intensive use (hardwearing and resistant to ozone, UV, weather and ageing)
  • Made in Europe!
  • Low permeability of gas
  • Chemical resistant
  • Reinforced with a steel spiral and strong textile reinforcements
  • Temperature range -40°C/ +120°C
  • Suitable for steam sterilisation at 110°C (max. 30 minutes)
  • Internal diameter 38 mm / external diameter 52 mm / wall thickness 7 mm
  • Max. operating pressure: 10 bar, max. vacuum: -0.9 bar. 
  • Min. burst pressure: 30 bar 
  • Complies with: FDA 21 CFR 177.1550, 1935/2004/CE, 1907/2006/CE (REACH), 3A Sanitary Standard Class II

Specifications

Data sheet

Type of equipment
Hoses & Couplings

Dimensions (incl. Packaging)

Width
7.00 cm
Height
7.00 cm
Length
500.00 cm
Weight
9.15 kg